Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 589 / 813

R&S
®
ZVA/ZVB/ZVT CALCulate
1145.1084.12 6.127 E-6
2.2 k
Ω
and enable deembedding.
CALCulate<Ch>:TRANsform:VNETworks:SENDed:DEEMbedding<Ph_pt>:TNDef
inition FIMPort | CSL | LSC | CSC | LSL | SLC | SCL | SCC | SLL
Selects the circuit model for single ended port deembedding.
<Ch> Channel number.
<Ph_pt>
Physical port number
Parameters Possible circuit models (character data); see circuit models.
*RST value CSL
SCPI, Command
Types Device-specific, command or query.
Example:
See
CALCulate<Ch>:TRANsform:VNETworks:SENDed:DEEMbedding[:STATe]
CALCulate<Ch>:TRANsform:VNETworks:SENDed:EMBedding<Ph_pt>:PARamet
ers:C<no> CSL | LSC | CSC | SLC | SCL | SCC,<numeric_value>
Specifies the capacitance values C1, C2 in the different circuit models for single ended port embedding.
<Ch> Channel number.
<Ph_pt> Physical port number
<no> Number of capacitance in circuit model. If unspecified the numeric
suffix is set to 1.
Range [def. unit] 1 to 2 [–] The number of capacitances depends on the selected
circuit model.
Parameters Possible circuit models (character data); see circuit models.
*RST value – (see command type description below)
<numeric_value> Capacitance C<no> for the specified circuit model.
Range [def. unit] –1mF to 1 mF [F]. The increment is 1 fF (10
–15
F).
*RST value 1 pF (10
–12
F)
SCPI, Command
Types Device-specific, command or query. In the query form, the
<numeric_value> parameter must be omitted. The command
returns the capacitance value for the specified circuit model.
Example:
*RST; CALC:TRAN:VNET:SEND:EMB:PAR:C2? CSC
Query the default capacitance C2 for the Serial C, shunt C circuit
model. The response is 1E-012 (1 pF).
CALC:TRAN:VNET:SEND:EMB:PAR:C2 CSC, 2.2E-12
Increase the capacitance to 2.2 pF.