Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 548 / 813

CALCulate R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.86 E-6
CALCulate<Ch/Tr>:MARKer<Mk>:FUNCtion[:SELect] MAXimum | MINimum |
RPEak | LPEak | NPEak | TARGet | LTARget | RTARget | BFILter
Selects a search mode for marker no. <Mk>, which can then be initiated using one of the
CALCulate<Ch/Tr>:MARKer<Mk>:SEARch..., CALCulate<Ch/Tr>:MARKer<Mk>:MAXimum
or CALCulate<Ch/Tr>:MARKer<Mk>:MINimum
functions. The marker must be created before
using
CALCulate<Ch/Tr>:MARKer<Mk>[:STATe] ON
.
Note: This command is not needed expect for compatibility with ZVR programs. Use
CALCulate<Ch/Tr>:MARKer<Mk>:FUNCtion:EXECute
to select a search mode and at the
same time initiate the search. The
CALCulate<Ch/Tr>:MARKer<Mk>:SEARch...,
CALCulate<Ch/Tr>:MARKer<Mk>:MAXimum or
CALCulate<Ch/Tr>:MARKer<Mk>:MINimum
functions also select the search mode.
<Ch/Tr>
Channel number used to identify the active trace.
<Mk> Marker number in the range 1 to 10. For a bandfilter search
(
BFILter
) this numeric suffix is ignored and may be set to any value
because the bandfilter search functions always use markers Mkr1 to
Mkr4.
Parameters See list of parameters below.
*RST value –
SCPI,
Command
Types
Device-specific, command or query.
The analyzer provides the following search modes:
Mode Selected search mode
MAXimum
Absolute maximum in the search range (see
CALCulate<Ch/Tr>:MARKer<Mk>:FUNCtion:DOMain:USER
<numeric_value>)
MINimum Absolute maximum in the search range
RPEak
Next valid peak to the right of the current marker position
LPEak Next valid peak to the left
NPEak Next highest value among the valid peaks
TARGet Target value (see
CALCulate<Ch/Tr>:MARKer<Mk>:TARget
)
RTARget Next target value to the right of the current marker position
LTARget Next target value to the left
BFILter Bandfilter search. Bandfilter search. The results are queried using
CALCulate<Ch/Tr>:MARKer<Mk>:BWIDth.