Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 553 / 813

R&S
®
ZVA/ZVB/ZVT CALCulate
1145.1084.12 6.91 E-6
Example:
Suppose that the active setup contains an active trace no. 1 (see
example for CALCulate<Ch>:PARameter:SELect).
CALC:MARK:REF ON
Create the reference marker and display it in the center of the sweep
range.
CALC:MARK:REF:Y?
Query the measurement value at the reference marker position.
CALCulate<Ch/Tr>:MARKer<Mk>:SEARch[:IMMediate]
Initiates a search according to the search function selected with
CALCulate<Ch/Tr>:MARKer<Mk>:FUNCtion[:SELect]
. The marker must be created before using
CALCulate<Ch/Tr>:MARKer<Mk>[:STATe] ON
.
Note: Together with
CALCulate<Ch/Tr>:MARKer<Mk>:FUNCtion[:SELect]
this command is the
ZVR-compatible equivalent of
CALCulate<Ch/Tr>:MARKer<Mk>:FUNCtion:EXECute ...
.
<Ch/Tr> Channel number used to identify the active trace.
<Mk>
Marker number in the range 1 to 10. For a bandfilter search (
BFILter
)
this numeric suffix is ignored and may be set to any value because the
bandfilter search functions always use markers Mkr1 to Mkr4.
Range [def.
unit]
– [–]
*RST value –
SCPI,
Command
Types Device-specific, no query.
CALCulate<Ch/Tr>:MARKer<Mk>:SEARch:LEFT
Selects a search mode for marker no. <Mk> and initiates a search for the next valid peak to the left.
The marker must be created before using
CALCulate<Ch/Tr>:MARKer<Mk>[:STATe] ON
.
Note: This command is the ZVR-compatible equivalent of
CALCulate<Ch/Tr>:MARKer<Mk>:FUNCtion:EXECute LPEak
.
<Ch/Tr> Channel number used to identify the active trace.
<Mk> Marker number in the range 1 to 10.
Range [def. unit] – [–]
*RST value –
SCPI, Command Types Device-specific, no query.