Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 5 / 813

1145.1084.02 RE.5 E-6
What's New in this Revision
This manual describes version V1.80 of the ZVA/ZVB/ZVT firmware. Compared to the previous version
V1.78, the new firmware provides numerous extensions and improvements. The major new features
and bug fixes are listed below.
To check your ZVA/ZVB/ZVT firmware version, click Help – About Nwa...
New Features in Firmware V1.80 (Compared to V1.78)
ƒ
New measurement mode: Frequency Conversion (option R&S ZVA-K4, including Harmonic
Distortion measurements and Mixer Mode)
ƒ
New calibration type: Power calibration
ƒ
Support for external test devices: External generators and power meters can be controlled
via USB, LAN, GPIB bus, or other interface types
ƒ
Adaptive Gain Control (AGC) of the receiver
ƒ
Automatic Level Control (ALC) of the source
ƒ
Low Phase Noise mode
ƒ
Extended bandfilter search mode: Bandpass Search Ref to Marker
ƒ
Improved access to the time domain and frequency domain stimulus values in the Transform –
Time Domain Stimulus Axis menu.
ƒ
Frequency Step Size is a setting parameter for frequency sweeps
ƒ
Marker values can be exported to an ASCII file.
ƒ
New remote control command
[SENSe<Ch>:]CORRection:COLLect:METHod?
returns a list
of all calibration types for channel <Ch>.
ƒ
New remote control commands
[SENSe<Ch>:]
CORRection:CONNection and
[SENSe<Ch>:]CORRection:CONNection:DELete
configure and delete user-defined
connector types.
ƒ
New remote control command
[SENSe<Ch>:]CORRection:CKIT:<std_type>
defines the
parameters of arbitrary connector types.
ƒ
New remote control commands
SYSTem:SOUNd:ALARm[:STATe]
and
SYSTem:SOUNd:ALARm[:STATe]
switch alarm and status sounds on or off.
Fixed Issues
ƒ
Trace mathematics can distinguish between voltages and dimensionless quantities ( Result is
Wave Quantity ).
ƒ
Zero Delay at Marker can now be used for all ports, the arithmetic problems have been solved.