Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 670 / 813

SENSe R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.208 E-6
TOSM TOSM 'SCORR1' to
'SCORR12'
(at present the
isolation terms
'SCORR4' and
'SCORR10' are
not included)
TOM, TRM,
TRL, TNA,
TOM
Enhanced,
Enhanced
TSM TOM | TRM | TRL | TNA | ETOM | ETSM 'DIRECTIVITY',
'SRCMATCH',
'REFLTRACK',
'LOADMATCH',
'TRANSTRACK'
(for reading and
writing)
'G11' ... 'G22'
and 'H11', 'H12',
'H22' (for
reading only; the
'H21' matrix
elements are
normalized to 1)
[SENSe<Ch>:]CORRection:EDELay<port_no>:AUTO ONCE
Defines the offset parameter for the active test port such that the residual delay of the active trace is
minimized across the entire sweep range.
<Ch> Channel number of the offset-corrected channel.
<port_no> Port number of the analyzer. This numeric suffix is ignored; the
active port is determined by the active trace.
ONCE Applies the Auto Length function.
*RST value – [–]
SCPI, Command
Types Device-specific, no query
Example:
*RST; CORR:EDEL:AUTO ONCE
Reset the instrument and apply the auto length function to the
default trace
(Trc1 in channel 1).
[SENSe<Ch>:]CORRection:EDELay<port_no>:DIELectric <permittivity>
Defines the permittivity for the offset correction at test port <port_no>.
<Ch>
Channel number of the offset-corrected channel
<port_no> Port number of the analyzer
<permittivity> Permittivity
Range [def. unit] 1 to +3.4028038 m
*RST value 1.00062 [–]
SCPI, Command Types Device-specific, command or query
Example:
See [SENSe<Ch>:]CORRection:EDELay<port_no>:ELENgth