Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 716 / 813

SENSe R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.254 E-6
Range [def. unit] 1 to 2147483647. [1] 1 is allowed if start and stop frequencies
are equal.
*RST value 51
SCPI, Command
Types Device-specific, command or query
Example:
SEGM:ADD
Create a new sweep segment no. 1 in channel no. 1 using
default settings and thus 51 sweep points.
SEGM:SWE:POIN 401
Increase the number of points to 401.
[SENSe<Ch>:]SEGMent<Seg>:SWEep:TIME <numeric_value>
Sets the duration of the sweep in sweep segment no. <Seg> (Segment Sweep Time) . At the same time,
the command activates separate sweep time setting in all sweep segments
(
[SENSe<Ch>:]SEGMent<Seg>:SWEep:TIME:CONTrol ON
).
<Ch> Channel number 1.
<Seg> Sweep segment number.
<numeric_value>
Internal source power.
Range [def. unit] The minimum duration depends on the other channel settings, in
particular on the number of points
(
[SENSe<Ch>:]SEGMent<Seg>:SWEep:POINts
), the IF
bandwidth (BWID) and the delay for each partial measurement
(
[SENSe<Ch>:]SEGMent<Seg>:SWEep:DWELl
). The maximum
is 1000 s. [s] Changing the duration leaves the number of points
unchanged but directly affects the delay.
*RST value MIN, depending on the channel settings. This default value
corresponds to automatic sweep time setting in manual control.