Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 592 / 813

CONFigure R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.130 E-6
CONFigure
CONFigure:CHANnel<Ch>...
This subsystem creates and deletes channels and assigns names to channels. The commands are
device-specific.
CONFigure:CHANnel<Ch>:CATalog?
Returns the numbers and names of all channels in the current setup.
<Ch>
Channel number. This parameter is ignored because the command
returns
all channels.
Response String with comma-separated list of channel numbers and names, see
example below. If all channels have been deleted the response is an
empty string ("").
*RST value –
SCPI,
Command
Types Device-specific, query only.
Example:
*RST; CONF:CHAN2:STAT ON; NAME 'New Channel'
Create channel 2 and assign the channel name "New Channel".
CONF:CHAN:CAT?
Query all channels and their names. As a default channel no. 1 is
created on *RST, the response is '
1,Ch1,2,New_Channel'.
CONFigure:CHANnel<Ch>:NAME '<string>'
Assigns a name to channel number <Ch>. The channel must be created before
(
CONFigure:CHANnel<Ch>[:STATe] ON
). Moreover it is not possible to assign the same name to
two different channels.
CONFigure:CHANnel<Ch>:CATalog?
returns a list of all defined channels
with their names.
<Ch> Number of an existing channel.
'<string>' Channel name, e.g. 'Channel 4'.
*RST value –
SCPI, Command Types
Device-specific, command or query.
Example:
See CONFigure:CHANnel<Ch>:CATalog?