Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 575 / 813

R&S
®
ZVA/ZVB/ZVT CALCulate
1145.1084.12 6.113 E-6
CALCulate<Ch/Tr>:TRANsform:TIME:LPASs:DCSParam:CONTinuous
<Boolean>
Determines whether continuous extrapolation for the DC value is enabled.
<Ch/Tr>
Channel number used to identify the active trace
<Boolean> ON – Continuous extrapolation enabled
OFF – Continuous extrapolation disabled
*RST value OFF [–]
SCPI, Command
Types Device-specific, command or query
Example:
See
CALCulate<Ch/Tr>:TRANsform:TIME:LPASs:DCSParam
CALCulate<Ch/Tr>:TRANsform:TIME:LPASs:DCSParam:EXTRapolate
Extrapolates the measured trace towards f = 0 and overwrites the current DC value
(
CALCulate<Ch/Tr>:TRANsform:TIME:LPASs:DCSParam
). The command is relevant for low pass
time domain transforms.
<Ch/Tr>
Channel number used to identify the active trace
Parameters None
*RST value –
SCPI, Command
Types Device-specific, no query (the command causes an event)
Example:
See
CALCulate<Ch/Tr>:TRANsform:TIME:LPASs:DCSParam
CALCulate<Ch/Tr>:TRANsform:TIME:LPFRequency
Calculates the harmonic grid for low pass time domain transforms, keeping the stop frequency and the
number of points.
Use
CALCulate<Ch/Tr>:TRANsform:TIME:LPASs
if you wish to use one of the other
algorithms for calculating the grid.
<Ch/Tr> Channel number used to identify the active trace
Parameters None
*RST value –
SCPI, Command Types
Device-specific, no query (the command causes an event)
Example:
See CALCulate<Ch/Tr>:TRANsform:TIME[:TYPE]