Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 571 / 813

R&S
®
ZVA/ZVB/ZVT CALCulate
1145.1084.12 6.109 E-6
CALCulate<Ch/Tr>:STATistics[:STATe] <Boolean>
Displays or hides all statistical results in the diagram area of trace no. <Ch/Tr>.
<Ch/Tr> Channel number used to identify the active trace.
<Boolean> ON | OFF - Statistical info field on or off.
*RST value OFF
SCPI, Command
Types Device-specific, command or query.
Example:
*RST; CALC:STAT:STAT?
Query the *RST value of the command. The response is 0; the
statistical results are hidden.
CALCulate<Ch/Tr>:SMOothing...
This subsystem provides the settings for trace smoothing.
CALCulate<Ch/Tr>:SMOothing:APERture <numeric_value>
Defines how many measurement points are averaged to smooth the trace.
<Ch/Tr> Channel number used to identify the active trace. If unspecified
the numeric suffix is set to 1.
<numeric_value> Smoothing aperture.
Range [def. unit] 0.05% to 100%. A smoothing aperture of n % means that the
smoothing interval for each sweep point i with stimulus value x
i
is
equal to [x
i
– span*n/200, x
i
+ span*n/200], and that the result of i
is replaced by the arithmetic mean value of all measurement
points in this interval. [%]
*RST value 1
SCPI, Command
Types Device-specific, command or query.
Example:
*RST; CALC:SMO ON
Activate smoothing for the default trace.
CALC:SMO:APER 0.5
Reduce the smoothing aperture to 0.5 %.
CALCulate<Ch/Tr>:SMOothing[:STATe] <Boolean>
Enables or disables smoothing for trace no. <Ch/Tr>.
<Ch/Tr> Channel number used to identify the active trace.
<Boolean>
ON | OFF - Smoothing on or off.
*RST value OFF