Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 557 / 813

R&S
®
ZVA/ZVB/ZVT CALCulate
1145.1084.12 6.95 E-6
Example:
Suppose that the active setup contains an active trace no. 1
(see example for CALCulate<Ch>:PARameter:SELect) and the
sweep range for a frequency sweep starts at 1 GHz.
CALC:MARK ON
Create marker no. 1 and display it in the center of the sweep
range.
CALC:MARK:X 1GHz
Set the marker to the beginning of the sweep range.
CALCulate<Ch/Tr>:MARKer<Mk>:Y?
Returns the response (in Cartesian diagrams: y-axis) value of marker no. <Mk>. The marker must be
created before using
CALCulate<Ch/Tr>:MARKer<Mk>[:STATe] ON
.
<Ch/Tr> Channel number used to identify the active trace.
<Mk> Marker number in the range 1 to 10.
Response Response value of marker no. <Mk>.
Range [def.
unit]
Depending on the measured quantity. [unit depending on the marker
format; see
CALCulate<Ch/Tr>:MARKer<Mk>:FORMat
]
*RST value –
SCPI,
Command
Types Device-specific, query only.
Example:
Suppose that the active setup contains an active trace no. 1 (see
example for CALCulate<Ch>:PARameter:SELect).
CALC:MARK ON
Create marker no. 1 and display it in the center of the sweep range.
CALC:MARK:Y?
Query the measurement value at the marker position.
CALCulate:MATH
CALCulate<Ch/Tr>:MATH...
This subsystem permits processing of measured data in numerical expression format. The operators
are +, -, *, / and use of constants and data arrays are permitted.