Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 648 / 813

PROGram... R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.186 E-6
Example:
PROG:SEL:NAME PROG
Selects general program execution on the analyzer.
MMEM:CDIR 'C:\Program Files\Rohde&Schwarz\Network Analyzer\Bin'
Go to the program directory.
PROG:EXEC 'iecwin32.exe'
Start the application iecwin32.
PROG:EXEC:WAIT
Lock command execution and manual control of the analyzer until
iecwin32 is paused or stopped.
PROGram[:SELected]:NAME PROG
Selects the application to be run on the analyzer. At present, only the general parameter PROG is
available:
PROGram[:SELected]:EXECute
can start any program.
Use this command in order to avoid problems should the default value change in future firmware
versions.
PROG Any program running under Windows XP Embedded or any file that
can be opened with an application program available on the analyzer.
*RST value PROG
SCPI,
Command
Types Confirmed, command or query.
Example:
See PROGram[:SELected]:EXECute.
PROGram[:SELected]:WAIT
Locks command execution and manual control of the analyzer while a program started via
PROGram[:SELected]:EXECute
is running. The analyzer does not execute any further commands or
queries until the program is stopped or paused.
Parameters None.
*RST value –
SCPI,
Command
Types Confirmed, command or query. The query also locks command
execution; it returns 1 when the executed program is stopped or
paused.
Example:
See PROGram[:SELected]:EXECute.