Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 656 / 813

SENSe R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.194 E-6
MSHort | FSHort Short (m) or short (f) '<Ckit_Name>' ... <L3>
complete parameter list with
inductance coefficients, no
OPEN | SHORT
OSHort | MOSHort |
FOSHort Offset short (sexless) or
offset short (m) or offset
short (f)
(for user-defined connector
types only) '<Ckit_Name>' ... <L3>
complete parameter list with
inductance coefficients, no
OPEN | SHORT
MMTCh | FMTCh Match (m) or match (f) '<Ckit_Name>' ...
<Max_Freq>
no offset parameters, no
polynomial coefficients, no
OPEN | SHORt
MREFlect |
FREFlect Reflect (m) or reflect (f) '<Ckit_Name>' ... OPEN |
SHORt
no loss, otherwise complete
parameter list
MMTHrough |
MFTHrough |
FFTHrough Through (m - m) or through
(m - f) or through (f - f) '<Ckit_Name>' ... <Loss>
no load parameters
(polynomial coefficients), no
OPEN | SHORt
MMLIne1 |
MFLIne1 | FFLIne1 Line (m - m) or line (m - f)
or line (f - f) '<Ckit_Name>' ... <Loss>
no load parameters
(polynomial coefficients), no
OPEN | SHORt
MMATten |
MFATten | FFATten Attenuation (m - m) or
attenuation (m - f) or
attenuation (f - f) '<Ckit_Name>' ... <Max_Freq>
no offset parameters, no load
parameters (polynomial
coefficients), no OPEN |
SHORt
MMSNetwork |
MFSNetwork |
FFSNetwork Symmetric network (m - m)
or symmetric network (m -
f) or symmetric network (f -
f) '<Ckit_Name>' ... OPEN |
SHORt
no loss, otherwise complete
parameter list
For a complete overview of the
[SENSe<Ch>:]CORRection:CKIT:<conn_type>:<std_type>
commands refer to the SCPI command lists.
[SENSe<Ch>:]CORRection:CKIT:<conn_type>:SELect '<Ckit_Name>'
Selects the calibration kit to be used for a specified connector type <conn_type>.
<Ch> Channel number. This suffix is ignored because calibration kits are
channel-independent.
<conn_type> Connector type, one of the following identifiers:
N50, N75
: N 50
Ω
or N 75
Ω
connectors
PC7, PC35, PC292
: PC 7, PC 3.5 or 2.92 mm connectors
USER<no>
: User-defined connectors UserConn1, UserConn2,
SMA
: User-defined connector type SMA ...
'<Ckit_Name>' String parameters containing the name of a calibration kit available on
the analyzer.