Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 749 / 813

R&S
®
ZVA/ZVB/ZVT STATus...
1145.1084.12 6.287 E-6
Example:
STAT:OPER?
Query the EVENt part of the OPERation register to check whether
an event has occurred since the last reading.
STATus:QUEStionable:LIMit<1|2>:NTRansition
Sets the negative transition filter. Setting a bit causes a 1 to 0 transition in the corresponding bit of the
associated condition register to cause a 1 to be written in the associated bit of the corresponding event
register.
<NRf> 0 to 65535 (decimal representation)
*RST value
– (see also Reset Values of the Status Reporting System)
SCPI, Command
Types Confirmed, command or query
Example:
STAT:QUES:LIM2:NTR 6
Set bits no. 1 and 2 of the QUEStionable:LIMit2:NTRansition
register
STATus:QUEStionable:LIMit<1|2>:PTRansition
Sets the positive transition filter. Setting a bit causes a 0 to 1 transition in the corresponding bit of the
associated condition register to cause a 1 to be written in the associated bit of the corresponding event
register.
<NRf> 0 to 65535 (decimal representation)
*RST value
– (see also Reset Values of the Status Reporting System)
SCPI, Command
Types Confirmed, command or query
Example:
STAT:LIM2:PTR 6
Set bits no. 1 and 20 of the QUEStionable:LIMit2:PTRansition
register
STATus:QUEue[:NEXT]?
Queries and at the same time deletes the oldest entry in the error queue. Operation is identical to that
of SYSTem:ERRor[:NEXT]?
The entry consists of an error number and a short description of the error. Positive error numbers are
instrument-dependent. Negative error numbers are reserved by the SCPI standard; see section Error
Messages.
*RST value –
SCPI, Command
Types Confirmed, query only