Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 529 / 813

R&S
®
ZVA/ZVB/ZVT CALCulate
1145.1084.12 6.67 E-6
CALCulate<Ch/Tr>:LIMit:LOWer:SHIFt <numeric_value>
Shifts all lower and upper limit line segments assigned to the active trace in vertical direction.
This command is identical with CALCulate<Ch/Tr>:LIMit:UPPer:SHIFt.
<Ch/Tr>
Channel number used to identify the active trace.
<numeric_value> Response offset value for all limit line segments.
Range [def. unit] Almost no restriction for limit segments; see Rules for Limit Line
Definition. [dB]
*RST value –
SCPI, Command
Types Device-specific, no query.
Example:
See CALCulate<Ch/Tr>:LIMit:LOWer:FEED.
CALCulate<Ch/Tr>:LIMit:LOWer:STATe <Boolean>
Switches the lower limit check on or off. Lower limit line segments are assigned even numbers; see
CALCulate<Ch/Tr>:LIMit:LOWer[:DATA]
. The command does not affect segments with odd
numbers.
Use
CALCulate<Ch/Tr>:LIMit:STATe
to switch on or off the entire limit check, including
upper and lower limit lines.
<Ch/Tr> Channel number used to identify the active trace.
<Boolean>
ON | OFF - Limit check on or off.
*RST value OFF
SCPI,
Command
Types
Confirmed, command or query.
Example:
CALC:LIM:LOW -10, 0, 0, -10
Define the following lower and (default) upper limit line segments:
CALC:LIM:LOW:STAT ON; CALC:LIM:FAIL?
Switch the limit check on and query the result.