Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 603 / 813

R&S
®
ZVA/ZVB/ZVT DISPlay...
1145.1084.12 6.141 E-6
DISPlay:WINDow<Wnd>:TRACe<WndTr>:X:OFFSet <numeric_value>
Shifts the trace <WndTr> in horizontal direction, leaving the positions of all markers unchanged.
<Wnd> Number of an existing diagram area (defined by means of
DISPlay:WINDow<Wnd>:STATe ON
).
<WndTr> Existing trace number, assigned by means of
DISPlay:WINDow<Wnd>:TRACe<WndTr>:FEED
.
<numeric_value> Stimulus offset value.
Range [def. unit] –1000 GHz to +1000 GHz [Hz, for frequency sweeps]. The range
and unit depends on the sweep type
(
[SENSe<Ch>:]SWEep:TYPE
).
*RST value 0.
SCPI, Command
Types Device-specific, with query.
Example:
*RST; :DISP:WIND:TRAC:X:OFFS 1MHZ; :DISP:WIND:TRAC:Y:OFFS 10
Create the default trace and shift it horizontally by 1 MHz,
vertically by 10 dB.
DISPlay:WINDow<Wnd>:TRACe<WndTr>:Y:OFFSet <Magnitude>[,<Phase>,
<Real>, <Imaginary>]
Modifies all points of the trace <WndTr> by means of an added and/or a multiplied complex constant.
The response values M of the trace are transformed according to:
<Wnd> Number of an existing diagram area (defined by means of
DISPlay:WINDow<Wnd>:STATe ON
).
<WndTr> Existing trace number, assigned by means of
DISPlay:WINDow<Wnd>:TRACe<WndTr>:FEED
.
<Magnitude> Multiplied magnitude factor
Range [def. unit] –300 dB to + 300 dB [dB]
*RST value 0 dB
<Phase> Multiplied phase factor, optional for setting command but returned
by query
Range [def. unit] –3.4*10
38
deg to +3.4*10
38
deg [deg]
*RST value 0 deg
<Real>,
<Imaginary> Real and imaginary part of added complex constant, optional for
setting command but returned by query
Range [def. unit] –3.4*10
38
to +3.4*10
38
[–]
*RST value 0.
SCPI, Command
Types Device-specific, with query.