Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 650 / 813

SENSe R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.188 E-6
[SENSe<Ch>:]AVERage[:STATe] <Boolean>
Enable or disable the sweep average.
<Ch> Channel number.
<Boolean> ON | OFF - Enables or disables the automatic calculation of the sweep
average over the specified number of sweeps
([SENSe<Ch>:]AVERage:COUNt).
*RST value ON
SCPI,
Command
Types Confirmed, command or query
Example:
AVER:COUN 15
Set the average factor for channel 1 to 15.
AVER ON
Enable the sweep average over the defined number of sweeps.
[SENSe<Ch>:]BANDwidth...
This subsystem sets the bandwidth of the IF measurement filter (resolution bandwidth).The forms
BANDwidth
and
BWIDth
are equivalent.
[SENSe<Ch>:]BANDwidth|BWIDth[:RESolution] <numeric_value>
Defines the resolution bandwidth of the analyzer (Meas. Bandwidth) .
<Ch>
Channel number 1 to 9999. If unspecified the numeric suffix is set
to 1.
<numeric_value>
Resolution bandwidth
Range [def. unit] 1 Hz to 5 MHz [Hz]. UP and DOWN increment/decrement the
bandwidth in 1-2-5 steps for each decade. The analyzer rounds up
any entered value between these steps and rounds down values
exceeding the maximum bandwidth.
*RST value 10 kHz
SCPI, Command
Types
Confirmed, command or query
Example:
BAND 1.1
Set a resolution bandwidth of approx. 1.1 Hz for channel 1.
BAND?
The analyzer returns the rounded bandwidth of 2 Hz.