Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 602 / 813

DISPlay... R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.140 E-6
Command
Types
Example:
CALC4:PAR:SDEF 'Ch4Tr1', 'S11'
Create channel 4 and a trace named Ch4Tr1 to measure the input
reflection coefficient S11.
DISP:WIND2:STAT ON
Create diagram area no. 2.
DISP:WIND2:TRAC9:FEED 'CH4TR1'
Display the generated trace in diagram area no. 2, assigning the trace
number 9 to it.
DISP:WIND2:TRAC9:DELete
Release the assignment between trace no. 9 and window no. 2. The
trace can still be referenced with its trace name
Ch4Tr1.
DISPlay:WINDow<Wnd>:TRACe<WndTr>:FEED '<Trace_name>'
Assigns an existing trace (
CALCulate<Ch>:PARameter:SDEFine <Trace_Name>
) to a diagram
area, using the <WndTr> suffix, and displays the trace.
A trace can be assigned to a diagram only once. If a attempt is made to assign the same trace a
second time (e.g. by typing
DISP:WIND2:TRAC8:FEED 'CH4TR1'
after executing the
program example below) an error message –114,"Header suffix out of range is generated.
<Wnd>
Number of an existing diagram area (defined by means of
DISPlay:WINDow<Wnd>:STATe ON
).
<WndTr> Trace number used to distinguish the traces of the same diagram
area <Wnd>.
'<Trace_name>' String parameter for the trace name, e.g. 'Trc4'.
*RST value –
SCPI, Command
Types Device-specific, no query.
Example:
CALC4:PAR:SDEF 'Ch4Tr1', 'S11'
Create channel 4 and a trace named Ch4Tr1 to measure the
input reflection coefficient S11.
DISP:WIND2:STAT ON
Create diagram area no. 2.
DISP:WIND2:TRAC9:FEED 'CH4TR1'
Display the generated trace in diagram area no. 2, assigning the
trace number 9 to it.