Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 636 / 813

MMEMory... R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.174 E-6
SCPI,
Command
Types Device-specific, no query.
Example:
Assume that the current setup contains two traces
named Trc1 and Trc2, respectively, and that limit
lines have been defined for Trc1.
MMEM:STOR:LIM 'TRC1',
'C:\Rohde&Schwarz\NWA\LIMitLines\Lim_Trc1.limit'
Store the limit line definition of Trc1 to a limit
line file.
MMEM:LOAD:LIM 'TRC2',
'C:\Rohde&Schwarz\NWA\LIMitLines\Lim_Trc1.limit'
Load the previously created limit line file and
assign the limit lines to Trc2.
MMEMory:LOAD:SEGMent <Ch>,'<file_name>'
Loads a sweep segment definition from a specified file and assigns it to a specified channel. Sweep
segments are defined using the
[SENSe<Ch>:]SEGMent<Seg>...
commands.
<Ch> Channel number.
'<file_name>' String parameter to specify the name and directory of the sweep
segment file to be loaded. The default extension (manual control) for
sweep segment files is *.seglist, although other extensions are allowed.
If no path is specified the analyzer searches the current directory, to be
queried with
MMEMory:CDIRectory?
.
*RST value –
SCPI,
Command
Types
Device-specific, no query.
Example:
Assume that the current setup contains two channels
numbered 1 and 2, respectively, and that sweep
segments have been defined for channel no. 1.
:MMEM:STOR:SEGM 1,
'C:\Rohde&Schwarz\NWA\SweepSegments\Seg_Ch1.seglist'
Store the sweep segment definition of channel 1 to a
sweep segment file.
MMEM:LOAD:SEGM 2,
'C:\Rohde&Schwarz\NWA\SweepSegments\Seg_Ch1.seglist'
Load the previously created sweep segment file and
use the sweep segments for channel 2.