Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 754 / 813

SYSTem... R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.292 E-6
*RST value –
*RST does not affect the color settings; see also description of
the Preset command.
SCPI, Command
Types Device-specific, command or query
Example:
SYST:DISP:COL LBAC
Select a light background, e.g. to generate color hardcopies.
SYSTem:DISPlay:UPDate <Boolean> | ONCE
Switches the display on or off while the analyzer is in the remote state. The command has no effect
while the analyzer is in the
Local operating state.
Switching off the display speeds up the measurement. This command may have an impact on the
update of trace and channel settings; see
SYSTem:SETTings:UPDate
.
<Boolean> ON | OFF – Switch the display on or off. If the display is switched on,
the analyzer shows the diagrams and traces like in manual control.
ONCE
Switch the display on and show the current trace. This parameter can
be used for occasional checks of the measurement results or settings.
The measurement is continued, however, the measurement results are
not updated. Compared to the ON setting, ONCE does not slow down
the measurement speed.
*RST value OFF
SCPI,
Command
Types
Device-specific, command or query
Example:
SYST:DISP:UPD ON
Switch the display on to view the traces and diagrams.
SYSTem:ERRor[:NEXT]?
Queries and at the same time deletes the oldest entry in the error queue. Operation is identical to that
of
STATus:QUEue[:NEXT]?
The entry consists of an error number and a short description of the error. Positive error numbers are
instrument-dependent. Negative error numbers are reserved by the SCPI standard; see section Error
Messages.
*RST value –
SCPI, Command
Types Confirmed, query only
Example:
SYST:ERR?
Query the oldest entry in the error queue. 0,"No error" is returned
if the error queue is empty.