Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 663 / 813

R&S
®
ZVA/ZVB/ZVT SENSe
1145.1084.12 6.201 E-6
[SENSe<Ch>:]CORRection:COLLect:DELete ['<cal_name>']
Deletes system error correction data generated and stored previously
.
<Ch> Channel number of the calibrated channel.
'<cal_name>'
Name of the calibration (string parameter) defined together with
calibration type
[SENSe<Ch>:]CORRection:COLLect:METHod:DEFine
. If nothing
is specified the analyzer deletes the last system error correction stored
by means of
[SENSe<Ch>:]CORRection:COLLect:SAVE
.
*RST value –
SCPI,
Command
Types Device-specific, no query
Example:
CORR:COLL:METH:DEF 'Test',RSHort,1
Select a one-port normalization at port 1 with a short standard as
calibration type.
CORR:COLL:SEL SHOR,1
Measure a short standard connected to port 1 and store the
measurement results of this standard.
CORR:COLL:SAVE; DEL
Calculate the system error correction data and apply them to the active
channel, then delete the data.
[SENSe<Ch>:]CORRection:COLLect:METHod FRTRans | TOM | TRM | TRL | TNA
| TOSM | FOPort1 | FOPort2 | FOPort12 | FOPTport | ROPTport | REFL1 | REFL2 |
REFL12 | TPORt | ETOM | ETSM
Selects a one-port or two-port calibration type at ports 1/2.
Use the generalized command
[SENSe<Ch>:]CORRection:COLLect:METHod:DEFine
to
select the calibration type for arbitrary analyzer ports or a multiport calibration type.
<Ch> Channel number of the calibrated channel.
Parameters Calibration types: TOM, TRM, TRL, TNA, TOSM, Full One Port, One
Path Two Port, Normalization (REFL1, REFL2 and REFL12 for one-
port, TPORT for two-port) , TOM Enhanced, TSM Enhanced .
The numbers in the parameters denote the analyzer ports. Parameters
for two-port calibration types contain no numbers because the
command is only valid for ports 1 and 2.
*RST value –
SCPI,
Command
Types Confirmed (with device-specific calibration types), command or query. If
several calibration types are assigned to channel <Ch>, the query
returns a list of all calibration types.
Example: See [SENSe<Ch>:]
CORRection:COLLect:SAVE .