Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 601 / 813

R&S
®
ZVA/ZVB/ZVT DISPlay...
1145.1084.12 6.139 E-6
DISPlay:WINDow<Wnd>:TITLe:DATA '<string>'
Defines a title for diagram area <Wnd>.
<Wnd> Number of the diagram area.
'
<string>
'
String variable for the title. The length of the title is practically
unlimited but should be kept short enough to be displayed in the
diagrams.
*RST value
''
SCPI,
Command
Types
Device-specific, command or query
Example:
*RST; :DISP:WIND:TITL:DATA 'S21 Test Diagram'
Define a title for the default diagram area. The title is displayed below
the top of the diagram area.
DISP:WIND:TITL OFF; TITL:DATA?
Hide the title. The title is no longer displayed but still defined so it can
be displayed again.
DISPlay:WINDow<Wnd>:TITLe[:STATe] <Boolean>
Displays or hides the title for area number <Wnd>, defined by means of
DISPlay:WINDow<Wnd>:TITLe:DATA
.
<Wnd> Number of the diagram area.
<Boolean> ON | OFF - Displays or hides the title.
*RST value ON
SCPI, Command Types
Device-specific, command or query
Example:
See DISPlay:WINDow<Wnd>:TITLe:DATA.
DISPlay:WINDow<Wnd>:TRACe<WndTr>:DELete
Releases the assignment between a trace and a diagram area, as defined by means of
DISPlay:WINDow<Wnd>:TRACe<WndTr>:FEED <Trace_Name>
and expressed by the <WndTr>
suffix. The trace itself is not deleted; this must be done via
CALCulate<Ch>:PARameter:DELete
<Trace_Name>
.
<Wnd> Number of an existing diagram area (defined by means of
DISPlay:WINDow<Wnd>:STATe ON
).
<WndTr> Trace number used to distinguish the traces of the same diagram
area <Wnd>.
*RST value –
SCPI, Device-specific, no query.