Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 753 / 813

R&S
®
ZVA/ZVB/ZVT SYSTem...
1145.1084.12 6.291 E-6
SYSTem:COMMunicate:RDEVice:PMETer<pmeter_no>:DELete
Clears the configuration table for external power meters.
<pmeter_no> Number of the configured power meter. This number is ignored, the
command clears all entries in the configuration table.
SCPI,
Command
Types
Device-specific, no query
Example:
See SYSTem:COMMunicate:RDEVice:PMETer<pmeter_no>:DEFine
SYSTem:DATA:SIZE ALL | AUTO
Defines the block size for the data transfer between the instrument hardware and the software. The
bock size has an impact on the display of traces and on the readout of trace data using the commands
of the
TRACe...
or
CALCulate<Ch/Tr>:DATA...
subsystems.
ALL Data transfer with full buffer size. The data for each sweep are
transferred together so that each displayed trace contains the data of
exactly one sweep. The same is true for queried trace data. The trace is
displayed or updated at once, the sweep progress is not visible on the
screen.
To make sure that all queried trace points stem from the same
sweep you can also use single sweep mode
(
INITiate<Ch>:CONTinuous OFF
) and the common command
*OPC?
AUTO Data transfer with an automatically determined block size. In general the
data blocks comprise only part of a trace, therefore the sweep progress is
visible on the screen. On the other hand the displayed trace can show
the results of two consecutive sweeps.
*RST value AUTO.
SCPI,
Command
Types Device-specific, command or query
Example:
SYST:DATA:SIZE ALL
Select data transfer with full buffer size in order to view the trace data
from a single sweep..
SYSTem:DISPlay:COLor DBACkground | LBACkground | BWLStyles | BWSolid
Selects the color scheme for all diagram areas in the active setup.
DBACkground
Dark background
LBACkground Light background
BWLStyles Black and white line styles
BWSolid Black and white solid