Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 708 / 813

SENSe R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.246 E-6
[SENSe<Ch>:]SEGMent:DELete:ALL
Deletes all sweep segments in the channel (Del. All Segments) .
[SENSe<Ch>:]SEGMent<Seg>:DELete
deletes a single segment.
<Ch> Channel number.
*RST value –
SCPI, Command
Types Device-specific, no query.
Example:
SEGM:ADD
Create a new sweep segment no. 1 in channel no. 1 using default
settings and thus NORMal selectivity.
SEGM:ALL
Delete the created segment and all segments in the channel
created before.
[SENSe<Ch>:]SEGMent<Seg>:FREQuency:CENTer?
Returns the center frequency of sweep segment no. <Seg>.
<Ch> Channel number.
<Seg>
Sweep segment number.
Response Center frequency of the sweep.
Range [def. unit] Depending on the instrument model [Hz].
*RST value –
SCPI, Command
Types Device specific, query only.
Example:
SEGM:INS 1MHZ, 1.5MHZ, 111, -21DBM, 0.5S, 0, 10KHZ
Create a sweep segment with a sweep range between 1.0 MHz
and 1.5 MHz.
SEGM:FREQ:CENT?
Query the center frequency of the created segment. The response
is 1.2500006.
Note: The frequency range of the sweep segment can be changed via
[SENSe<Ch>:]SEGMent<Seg>:FREQuency:STARt and
[SENSe<Ch>:]SEGMent<Seg>:FREQuency:STOP
.
[SENSe<Ch>:]SEGMent<Seg>:FREQuency:SPAN? <numeric_value>
Returns the width of the frequency range of sweep segment no. <Seg>.
<Ch> Channel number.
<Seg> Sweep segment number.
Response Frequency span of the sweep.
Range [def. unit] Depending on the instrument model [Hz].