Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 720 / 813

SENSe R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.258 E-6
Example:
*RST; CALC:PAR:MEAS 'TRC1', 'a1D1RMS'
Select the wave quantity a1 for the default trace and activate the
RMS detector.
SWE:DET:TIME 1
Specify an observation time of 1 s at each sweep points.
[SENSe<Ch>:]SWEep:DWELl <delay>
Defines the Meas. Delay time for each partial measurement. Setting a delay disables the automatic
calculation of the (minimum) sweep time; see [SENSe<Ch>:]SWEep:TIME:AUTO.
<Ch> Channel number.
<delay> Meas. delay before each partial measurement.
Range [def.
unit]
0 s to 3.002 s. [s] Changing the delay leaves the number of
points unchanged but has an impact on the duration of the sweep
([SENSe<Ch>:]SWEep:TIME).
*RST value 0 s
SCPI,
Command
Types Confirmed, command or query
Example:
FUNC "XFR:POW:S12"
Activate a frequency sweep and select the S-parameter S12 as
measured parameter for channel and trace no. 1.
SWE:TIME?
Query total sweep time.
SWE:DWEL 1
Set a delay of 1 s for each partial measurement.
SWE:TIME?
Query total sweep time. The time is extended by the delay times the
total number of partial measurements per sweep.
[SENSe<Ch>:]SWEep:POINts <no_points>
Defines the total number of measurement points per sweep (Number of Points) .
<Ch> Channel number 1.
<no_points> Number of points per sweep.
Range [def. unit] 2 to 2147483647. [1]
*RST value 201
SCPI, Command
Types Confirmed, command or query