Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 647 / 813

R&S
®
ZVA/ZVB/ZVT PROGram...
1145.1084.12 6.185 E-6
Range [def. unit] #B0000 to #B1111 (for setting command), 0 to 15 (query) [–]
The transferred values correspond to the following states of the
USER CONTROL connector:
#B0000 – no signal at any of the four pins 8, 9, 10, 11
#B0001 – output signal at pin 8
#B0010 – output signal at pin 9
#B0011 – output signal at pin 8 and 9
...
#B1111 – output signal at pin 8, 9, 10 and 11
*RST value #B0000 (0)
SCPI, Command
Types Confirmed, command or query. The query returns a decimal
value.
Example:
*RST; OUTP1:UPOR #B0001
Assign the channel bit value #B0001 to the active channel no. 1.
The analyzer performs a measurement in channel no. 1, therefore
the output signal at pin 8 is switched on.
CONF:CHAN2:STAT ON; OUTP2:UPOR #B0020
Create channel no. 2, causing it to become the active channel,
and assign the channel bit value #B0002. The analyzer performs
no measurement in channel no. 2, therefore the output signal is
not changed.
CALC2:PAR:SDEF 'Ch2Tr1', 'S11'
Create a trace named 'Ch2Tr1' and assign it to channel 2. While
the analyzer measures in channel 2, the output signal changes
from pin 8 to pin 9.
PROGram...
This subsystem controls external application programs that can be run on the analyzer.
PROGram[:SELected]:EXECute '<file_name>[ <command>]'
Starts an application program or open a file using an application available on the analyzer.
'<file_name>' Name and path of an application program to be executed or of a file to
be opened. The path can be defined as an absolute path (e.g. 'c:\...')
or relative to the current directory (MMEMory:CDIRectory). Blanks in
the file name are not allowed because everything after a blank is
interpreted as a <command>.
<command> Command name in the selected application <file_name> (optional).
*RST value –
SCPI,
Command
Types Confirmed, no query.