Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 547 / 813

R&S
®
ZVA/ZVB/ZVT CALCulate
1145.1084.12 6.85 E-6
Parameters See list of parameters below.
*RST value –
SCPI,
Command
Types Device-specific, no query.
Example:
Suppose that the active setup contains an active trace no. 1 (see
example for
CALCulate<Ch>:PARameter:SELect
).
CALC:MARK ON
Create marker 1 and assign it to trace no. 1.
CALC:MARK:FUNC:EXEC MAX; RES?
Move the created marker to the absolute maximum of the trace and
query the stimulus and response value of the search result.
The analyzer provides the following search modes:
Mode
Find...
MAXimum Absolute maximum in the search range (see
CALCulate<Ch/Tr>:MARKer<Mk>:FUNCtion:DOMain:USER
<numeric_value>)
MINimum Absolute maximum in the search range
RPEak
Next valid peak to the right of the current marker position
LPEak Next valid peak to the left
NPEak
Next highest or lowest value among the valid peaks (next peak)
TARGet Target value (see
CALCulate<Ch/Tr>:MARKer<Mk>:TARget
)
RTARget
Next target value to the right of the current marker position
LTARget Next target value to the left
BFILter Bandfilter search. The results are queried using
CALCulate<Ch/Tr>:MARKer<Mk>:BWIDth.
CALCulate<Ch/Tr>:MARKer<Mk>:FUNCtion:RESult?
Returns the result (stimulus and response value) of a search started by means of
CALCulate<Ch/Tr>:MARKer<Mk>:FUNCtion:EXECute
. The search must be executed before the
command is enabled.
<Ch/Tr> Channel number used to identify the active trace.
<Mk> Marker number in the range 1 to 10. This numeric suffix is ignored and
may be set to any value.
Response
Search result in the format <Stimulus value>, <Response_value>.
Range [def.
unit]
Depending on the measurement parameter. [unit depending on the
sweep type and the marker format; see
CALCulate<Ch/Tr>:MARKer<Mk>:FORMat
]
*RST value –
SCPI,
Command
Types Device-specific, query only.
Example:
See CALCulate<Ch/Tr>:MARKer<Mk>:FUNCtion:EXECute.