Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 513 / 813

R&S
®
ZVA/ZVB/ZVT CALCulate
1145.1084.12 6.51 E-6
SCORr14
Source match 3 (S33)
SCORr15 Reflection tracking 3 (S33)
SCORr16
Isolation 3 (S31)
SCORr17 Load match 3 (S31)
SCORr18
Transmission tracking 3 (S13)
SCORr19
Isolation 1 (S13)
SCORr20 Load match 1 (S13)
SCORr21
Transmission tracking 1 (S13)
SCORr22 Isolation 3 (S32)
SCORr23
Load match 3 (S32)
SCORr24 Transmission tracking 3 (S32)
SCORr25 Isolation 2 (S23)
SCORr26 Load match 2 (S23)
SCORR27 Transmission tracking 2 (S23)
Use the generalized command
[SENSe<Ch>:]CORRection:COLLect:CDATa
to read or write
error terms for arbitrary analyzer ports.
CALCulate<Ch/Tr>:DATA:NSWeep? SDATa,<Trace_Hist_Count>
Reads the response values of a trace acquired in single sweep mode (
INITiate<Ch>:CONTinuous
OFF
).
<Ch/Tr> Channel number used to identify the active trace.
SDATa Read unformatted sweep data (fixed parameter): Returns the
real and imaginary part of each measurement point (2 values
per trace point irrespective of the selected trace format).
<Trace_Hist_Count> Number of sweep to be read.
Range [def. unit]
1 to sweep count defined via
[SENSe<Ch>:]SWEep:COUNt
[–]
*RST value –
SCPI, Command
Types Device-specific, query only
Example:
SWE:COUN 10
Define the number of sweeps (10) to be measured in single
sweep mode.
INIT:CONT OFF; INIT
Activate single sweep mode and start a single sweep in
channel no. 1.
CALC:DATA:NSW? SDAT,5
Query the results of the 5
th
sweep.