Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 654 / 813

SENSe R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.192 E-6
<Ch> Channel number. This suffix is ignored because calibration kits are
channel-independent.
<conn_type>
Connector type, one of the following identifiers:
N50, N75
: N 50
Ω
or N 75
Ω
connectors
PC7, PC35, PC292
: PC 7, PC 3.5 or 2.92 mm connectors
USER<no>
: User-defined connectors UserConn1, UserConn2,
SMA
: User-defined connector type SMA ...
This command only supports ZVR-compatible connector types.
For general definitions use
[SENSe<Ch>:]CORRection:CKIT:<std_type>
.
<std_type>
Standard type. For reflection standards, the first character denotes the
gender, e.g.:
FOPEN, MOPEN
: Open (f) or Open (m) standard.
For transmission standards, the first two characters denotes
the genders on both ends, e.g.:
FFTHrough, MFTHrough, MMTHrough:
Through (ff), Through
(mf) or Through (mm) standard.
For a complete list of standard types refer to the table of standard types
below.
Parameter
list
String parameters to specify the configured standard
('<Ckit_Name>','<Std_No>') and numeric parameters defining its
properties. See detailed description below.
*RST value –
SCPI,
Command
Types Device-specific, command or query
Example:
CORR:CKIT:N50:FOPEN 'ZV-Z21','',0,1.8E+010,0.0151,0,0,0.22,-
0.22,0.0022
Define the properties of the open (f) standard for the N 50
Ω
connector
type contained in the ZV-Z21 calibration kit: Assign a valid frequency
range of 0 Hz to 18 GHz, an electrical length of 15.1 mm, 0 dB loss and
define the polynomial coefficients of the fringing capacitance as 0 fF,
0.22 fF/GHz, –0.22 fF/(GHz)
2
, 0.0022 fF/(GHz)
3
.
The parameters in the
[SENSe<Ch>:]CORRection:CKIT:<std_type>
and
[SENSe<Ch>:]CORRection:CKIT:<conn_type>:<std_type>
commands have the following
meaning:
Parameter Meaning Comment/Unit
'<Conn_Name>' Name of the connector type String parameter
'<Ckit_Name>' Name of the calibration kit String parameter
'<Std_No>' Label (e.g. the serial number) of the
standard String parameter
<Min_Freq> Min. frequency for which the circuit model
is valid Default unit is Hz