Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 681 / 813

R&S
®
ZVA/ZVB/ZVT SENSe
1145.1084.12 6.219 E-6
[SENSe<Ch>:]FREQuency:CONVersion:HARMonic:RPORt <port_no>
Selects the receive port for the harmonic measurement.
<Ch> Channel number.
<port_no> Integer port number.
Range [def. unit] Depending on the analyzer model [–].
*RST value 2
SCPI, Command Types Device-specific, command or query.
Example:
See [SENSe<Ch>:]FREQuency:CONVersion
[SENSe<Ch>:]FREQuency:CONVersion:HARMonic:SPORt <port_no>
Selects the source port for the harmonic measurement.
<Ch> Channel number.
<port_no> Integer port number.
Range [def. unit] Depending on the analyzer model [–].
*RST value 1
SCPI, Command Types Device-specific, command or query.
Example:
See [SENSe<Ch>:]FREQuency:CONVersion
SENSe:FREQuency:CONVersion:HARMonic
[SENSe<Ch>:]FREQuency...
This subsystem sets frequency-related parameters, especially the measurement and display ranges for
the different sweep types, and controls the frequency-converting measurement modes (harmonic
distortion, mixer mode, etc.).
The frequency ranges for the different instrument models are listed below:
ZVA8 ZVA24
Start, Stop
300 kHz to 8 GHz 300 kHz to 24 GHz
Center > 300 kHz to < 8 GHz > 300 kHz to < 24 GHz
Span
10 mHz to 7,9997 GHz 10 mHz to 23,9997 GHz
Note: For a frequency sweep the range can be defined alternatively by a combination of Start/Stop
frequencies or a Center frequency and Span. In fixed frequency mode (power sweep or
Time/CW Mode; see [SENSe<Ch/Tr>:]FUNCtion[:ON]) the measurement frequency is set by
means of [SENSe<Ch>:]FREQuency:CW|FIXed.
[SENSe<Ch>:]FREQuency:CENTer <center_frequency>
Defines the center of the measurement and display range for a frequency sweep.