Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 747 / 813

R&S
®
ZVA/ZVB/ZVT STATus...
1145.1084.12 6.285 E-6
STATus:QUEStionable:ENABle
Sets the enable mask which allows true conditions in the EVENt part of the QUEStionable register to be
reported in the summary bit. If a bit is 1 in the enable register and its associated event bit transitions to
true, a positive transition will occur in the summary bit (bit 3 of the STatus Byte).
<NRf> 0 to 65535 (decimal representation)
*RST value
– (see also Reset Values of the Status Reporting System)
SCPI, Command Types Confirmed, command or query
Example:
STAT:QUES:ENABle 1024
Set bit no. 10 of the QUEStionable:ENABle register
STATus:QUEStionable[:EVENt]?
Returns the contents of the EVENt part of the QUEStionable register. Reading an EVENt register clears
it.
*RST value –
SCPI, Command
Types Confirmed, query only
Example:
STAT:OPER?
Query the EVENt part of the OPERation register to check whether
an event has occurred since the last reading.
STATus:QUEStionable:NTRansition
Sets the negative transition filter. Setting a bit causes a 1 to 0 transition in the corresponding bit of the
associated condition register to cause a 1 to be written in the associated bit of the corresponding event
register.
<NRf> 0 to 65535 (decimal representation)
*RST value – (see also Reset Values of the Status Reporting System)
SCPI, Command Types Confirmed, command or query
Example:
STAT:QUES:NTR 1024
Set bit no. 10 of the QUEStionable:NTRansition register
STATus:QUEStionable:PTRansition
Sets the positive transition filter. Setting a bit causes a 0 to 1 transition in the corresponding bit of the
associated condition register to cause a 1 to be written in the associated bit of the corresponding event
register.