Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 522 / 813

CALCulate R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.60 E-6
CALCulate<Ch>:FSIMulator:BALun:DZConversion:BPORt2:ZCOMmon[:R]
<Impedance>
Defines the common mode impedance for the balanced port no. 2.
<Ch>
Channel number.
<Impedance> Common mode impedance. The increment (parameters UP or
DOWN) is 1
Ω
.
Range [def. unit]
0
Ω
to 3.4028032 M
Ω
[
Ω
(Ohm)]
*RST value
25
Ω
SCPI, Command
Types Device-specific, command or query.
Example:
See
CALCulate<Ch>:FSIMulator:BALun:DMCircuit:BPORt1:PARameters:C
CALCulate<Ch>:FSIMulator:BALun:DZConversion:BPORt2:ZDIFferent[:R]
<Impedance>
Defines the differential mode impedance for the balanced port no. 2.
<Ch> Channel number.
<Impedance> Differential mode impedance. The increment (parameters UP or
DOWN) is 1
Ω
.
Range [def. unit]
0
Ω
to 3.4028032 M
Ω
[
Ω
(Ohm)]
*RST value
100
Ω
SCPI,
Command
Types Device-specific, command or query.
Example:
See
CALCulate<Ch>:FSIMulator:BALun:DMCircuit:BPORt1:PARameters:C
CALCulate<Ch>:FSIMulator:STATe <Boolean>
Activates or deactivates the virtual matching network. When the network is activated, port 1 serves as
an unbalanced port, the physical ports no. 2 and 4 of the analyzer are combined to a logical (balanced)
port no. 2.
<Ch> Channel number.
<Boolean> ON - Enable the virtual matching network and adjust the port
configuration
OFF - Disable the virtual matching network
*RST value OFF
SCPI,
Command
Types Device-specific, command or query.
Example:
See
CALCulate<Ch>:FSIMulator:BALun:DMCircuit:BPORt1:PARameters:C.