Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 207 / 813

R&S
®
ZVA/ZVB/ZVT Trace Menu
1145.1084.12 4.45 E-6
In remote control each channel can contain an active trace. The active remote traces and the
active manual trace are independent of each other; see Active Traces in Remote Control.
Next Trace
Selects the next trace in a series of displayed traces as the active trace. This function is disabled if only
one trace is defined.
Next Trace has the following meaning:
•
In a list of traces displayed in a common diagram area, the next trace is the trace below the
current trace (in the figure above, Trc 3 is the active trace and Trc 4 is the next trace).
•
If the active trace is the last trace in the list, the next trace is the first trace in the trace list of the
next diagram area.
Remote
control:
The numeric suffix
<Ch / Tr>
appended to the first-level mnemonic of a command
selects a trace as active trace.
Select Trace
Opens a box to select an arbitrary trace of the active setup as the active trace. This function is disabled
if only one trace is defined.
Remote
control:
The numeric suffix
<Ch / Tr>
appended to the first-level mnemonic of a command
selects a trace as active trace.
Add Trace
Creates a new trace in the current diagram area and assigns it to the current channel. The new trace is
created with the trace and channel settings of the former active trace but displayed with another color.
The former and the new active trace are superimposed but can be easily separated, e.g. by changing
the
Reference Position.
The new trace is named Trc <n>, where <n> is the largest of all existing trace numbers plus one. The
name can be changed in the Trace Manager .