Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 349 / 813

R&S
®
ZVA/ZVB/ZVT Channel Menu
1145.1084.12 4.187 E-6
•
An inductor L connected in series with a resistor.
The 2-port transformation networks comprise all possible combinations of 2 basic blocks, where one
block represents a serial, the other a shunt element. In the default setting the resistors are not effective,
since the serial Rs are set to 0 , the shunt Rs are set to 10 M .
•
The first network is defined by its S-parameters stored in an imported two-port Touchstone file
(*.s2p). No additional parameters are required.
The following networks are composed of a serial C or L (as seen from the test port), followed by a shunt
C or L. They are named Serial C, Shunt C / Serial C, Shunt L / Serial L, Shunt C / Serial L, Shunt L.
•
The following networks are composed of a shunt C or L (as seen from the analyzer port),
followed by a serial C or L. They are named
Shunt C, Serial C / Shunt C, Serial L / Shunt L,
Serial C / Shunt L, Serial L.
Remote
control:
CALCulate<Ch>:TRANsform:VNETwork:SENDed...
MMEMory:LOAD:VNETworks<Ch>:SENDed:DEEMbedding<Ph_pt>
'<file_name>'
MMEMory:LOAD:VNETworks<Ch>:SENDed:EMBedding<Ph_pt>
'<file_name>'