Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 555 / 813

R&S
®
ZVA/ZVB/ZVT CALCulate
1145.1084.12 6.93 E-6
Command
Types
Example:
Suppose that the active setup contains an active trace no. 1 (see
example for
CALCulate<Ch>:PARameter:SELect
).
CALC:MARK ON; FUNC:EXEC MAXimum
Create marker no. 1 and assign them to trace no. 1. Activate a
maximum search for marker no. 1.
CALC:MARK:SEAR:TRAC ON
Enable the tracking mode for the created marker.
CALCulate<Ch/Tr>:MARKer<Mk>[:STATe] <Boolean>
Creates the marker numbered <Mk> and assigns it to trace no. <Ch/Tr>.
<Ch/Tr>
Channel number used to identify the active trace.
<Mk> Marker number in the range 1 to 10. If unspecified the numeric suffix
is set to 1.
<Boolean> ON | OFF - Creates or removes the marker.
*RST value OFF
SCPI,
Command
Types Device-specific, command or query.
Example:
Suppose that the active setup contains an active trace no. 1
(see example for CALCulate<Ch>:PARameter:SELect).
CALC:MARK ON; MARK2 ON
Create markers 1 and 2 and assign them to trace no. 1. The
default position of both markers is the center of the sweep
range.
CALCulate<Ch/Tr>:MARKer<Mk>:TARget <numeric_value>
Defines the target value for the target search of marker no. <Mk>, which can be activated using
CALCulate<Ch/Tr>:MARKer<Mk>:FUCTion:EXECute TARGet
.
<Ch/Tr> Channel number used to identify the active trace.
<Mk>
Marker number in the range 1 to 10.
<numeric_value> Target search value of marker no. <Mk>.
Range [def. unit] Depending on the format of the active trace (
CALCulate<Ch-
>Tr>:FORMat
). For a dB Mag trace the range is –300 dB to +200
dB, the increment (UP. DOWN) is 0.1 dB. [dB, deg etc.,
depending on the trace format]
*RST value Depending on the trace format; 0 dB for a dB Mag trace.
SCPI, Command
Types Device-specific, command or query.