NEC NEAX2400 ICS, Руководство по программированию

Страница: 590 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 547
Non-square Line Assignment - D
term
N-8D
N-8D Non-square Line Assignment - D
term
General Description
This service feature allows the line function buttons on the D
term
set to be freely assigned as line keys or as service
feature keys. These assignments are done on a per-station basis.
Operating Procedure
Key designations are assigned via the Maintenance Administration Terminal (MAT) [M-18].
Service Conditions
Programming one feature to more than one key will not provide enhanced service. For example, two MSG keys will
not provide a D
term
set with eight message memories. See MESSAGE REMINDER - D
term
[M-19D] .
Programming
STEP 1: ASDT - A LEN equipped with a D
term
Circuit Board must be assigned a station number and a
Telephone Equipment Class (TEC) of 12.
STEP 2: AKYD - Assign a MY Line, a Prime Line, and various sublines to the D
term
s.
TN: 1
STN: Station Number
TP: Type of D
term
0/1:
RING: Assign ringing to the entire phone
0: No Ringing
1: Ringing All Lines
2: Ringing on Prime Line Only
3: Flexible Ring Assignment enables RG parameter
PL TN STN: Prime Line Tenant and Station Number
KYN: Key Number (1-40)
KYI: Service Index
0: Key Not Used
1: Feature Key
2: Multi-line Key
KD: Not assigned for Feature Key
TN STN: Tenant Number and Station Number of Multi-line
RG: Ringing Assignment per Multi-line Appearance
0:
No Ringing
1: Ringing in Day Mode Only
2: Ringing in Night Mode Only
3: Ringing in Day and Night Mode
Any combination of available system extension numbers may be assigned to the keys of the D
term
instruments. There are no restrictions on order of multi-line appearance. Line appearances may be
arranged in any fashion, provided they are located within the same Module Group.