NEC NEAX2400 ICS, Руководство по программированию

Страница: 752 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 709
Software Line Appearance S-33
Programming
STEP 1: ASDT - Assign the station as a TEC = 18 for a Virtual Circuit. The Line Equipment Number (LEN) of
a SOFTWARE LINE APPEARANCE will exist in Groups 24-31.
STEP 2: AKYD - This command assigns for D
term
s the SOFTWARE LINE APPEARANCE to a programmable
Line/Feature key.
TN: 1
STN: Station Number
TP: Type of D
term
0/1:
RING: Assign ringing to the entire phone.
0: No Ringing
1: Ringing All Lines
2: Ringing on Prime Line Only
3: Flexible Ring Assignment, enables RG parameter.
PL TN STN: Prime Line Tenant and Station Number
KYN:
Key Number (1-40)
KYI: Service Index
0: Key Not Used
1: Feature Key
2: Multi-line Key
KD: Not assigned for Feature Key
TN STN: Tenant Number and Station Number of SOFTWARE LINE APPEARANCE.
RG: Ringing Assignment per multi-line appearance
0: No Ringing.
1: Ringing in Day Mode Only.
2: Ringing in Night Mode Only.
3: Ringing Day and Night.