NEC NEAX2400 ICS, Руководство по программированию

Страница: 330 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 287
Do Not Disturb - D
term
D-11D
Interactions
1. DO NOT DISTURB may be listed in some literature as available by a programmable Line/Feature key. A
D
term
ACD station is not equipped with a DND key. If DO NOT DISTURB is to be made available to this
station, it must be programmed to a Line/Feature key.
2. DATA INTERFACE-AUTOMATIC ANSWER may be activated if the D
term
station is in the DO NOT
DISTURB mode.
Programming
STEP 1: AKYD
- Assign the following key data for the D
term
:
TN: 1
STN: Station Number
TP: Type of D
term
0/1:
RING: 0: No Ringing
1: Ringing All Lines
2: Ringing on Prime Line Only
3: Flexible Ring Assignment, enables RG parameter
KYN: Key Number (1-40)
KYI: Service Index
0: Key Not Used
1: Feature Key
2: Multi-Line Key
KD: Not assigned for Feature Key
FKY: Feature key Number
FKY: = 50, DO NOT DISTURB
STEP 2: ADSL - Assign SN=0 (Idle) and FKY=50 (Do Not Disturb; DND).
This command is used for assigning the function to each soft key.
STEP 3: ASFC - Select an indication type (REST/DND) on the display of a D
term
when it terminates to a
station that has been set DO NOT DISTURB.
SFI: = 114, Calling Party DND Indication (D
term
)
0/1: REST/DND.