NEC NEAX2400 ICS, Руководство по программированию

Страница: 134 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 91
Boss - Secretary - Message Waiting Lamp Control B-8
B-8 Boss - Secretary - Message Waiting Lamp Control
General Description
This feature allows a secretary, via her station, to control the Call Indicator Lamp Note or Message Waiting (MW)
display on the boss' station.
Note:
The Call Indicator Lamp is used as the MW Lamp.
Operating Procedure
1. CALL FORWARDING [C-3, 5] is not set on Boss' station.
2. An incoming call for Boss' station is answered on Secretary's D
term
.
3. Secretary sets the Call Indicator Lamp or MW display on Boss' station. See Procedure 1 below.
4. Boss's station Call Indicator Lamp or the MW display is on.
5. Secretary cancels the Call Indicator Lamp or MW display on Boss' station.
To set Message Waiting at a Boss' station
Procedure 1 (Secretary's station requires a D
term
with a LED)
1. While remaining connected to the calling party, press the MW SET line/feature key.
2. The LCD display will indicate MW SET (for 5 seconds, in place of time display).
3. MW is set on Boss' station. Call Indicator Lamp or the MW display is on.
4. Secretary will not hear service set tone.
Procedure 2
1. Secretary releases the call after taking the message and presses the RECALL key. Dial tone is heard.
2. Secretary presses the MW SET line/feature key. LCD will indicate MW SET. Secretary will hear service
set tone.
3. MW is set to Boss' station. Call Indicator Lamp or the MW display is ON.
To cancel Message Waiting indication
Procedure 1
1. While remaining connected, Secretary presses the MW CANCEL line/feature key.
2. The LCD display will indicate MW CANCEL (For 5 seconds, in place of time display).
3. Boss' MW indication is then cancelled. Call Indicator Lamp or the MW display is OFF.
Procedure 2
1. Secretary presses Boss' line appearance. Dial tone is heard.
2. Press the MW CANCEL line/feature key. Service set tone is heard.
3. Secretary's LCD will display MW CANCEL.
4. Boss' MW indication is cancelled.
Service Conditions
1. Any number of D
term
stations within the system can be assigned to activate this feature.
2. Secretary must have a D
term
.
3. Any attempt to set BOSS-SECRETARY MW LAMP CONTROL to a station that already has an MW
indication will receive MW BUSY following Procedure 1 or a busy tone following Procedure 2.
4. Any station provided with the sub-line can set or cancel BOSS-SECRETARY MW LAMP CONTROL
indication on that sub-line.