NEC NEAX2400 ICS, Руководство по программированию

Страница: 419 / 1089

NEAX2400 IPX Feature Programming Manual
Page 376
NDA-24297, Issue 1
G-2 Group Calling
G-2 Group Calling
General Description
This feature allows a user to dial certain frequently called stations within an NEAX2400 IPX group using an easily
remembered number. The same number can be assigned to different user groups. The group call can initiate CALL
WAITING - ORIGINATING [C-31] to a busy station.
Operating Procedure
To initiate a group call
1. Lift the handset; receive dial tone.
2. Dial the GROUP CALLING access code (maximum 3 digits) plus the GROUP CALLING Station Code
(1 or 2 digits).
3. The call is completed.
To initiate a group call from a D
term
1. Redial key, plus GROUP CALLING station code (1 or 2 digits).
2. Call is completed.
Service Conditions
1. Each primary station equipped in a calling group will program the GROUP CALLING numbers through
their telephone.
2. GROUP CALLING data is retained in memory, even in the event of power failure, by means of Hard
Drive Backup via BKUPI command.
3. The memory for GROUP CALLING is shared with SPEED CALLING - STATION [S-21] or GROUP
[S-23].
4. A group for GROUP CALLING is identical to that of a SPEED CALLING - GROUP [S-23].
5. The number of groups per Module Group for GROUP CALLING and SPEED CALLING STATION/
GROUP [S-21, 23] is limited to the following:
GROUP CALLING Station Code: 1 digit (X) Maximum 100 Groups
2 digits (XX) Maximum 10 Groups
6. The number of stations that can be called per group can be set within the following limit:
a.) Number of Groups x Number of Station Codes = Less than 1,000
b.) The number of stations per group is assigned in multiples of 10
7. For more information, refer to SPEED-CALLING GROUP [S-23] .
8. A station using GROUP CALLING must be allowed individual SPEED CALLING STATION [S-21] and
CALL WAITING - ORIGINATING [C-31] service.
9. CALL WAITING - ORIGINATING [C-31] service can be set when the called station is busy. CALL
WAITING - ORIGINATING [C-31] will not be activated under the following conditions:
a.) DO NOT DISTURB (DND) [D-11D] is set to the called station.
b.) DATA LINE PRIVACY is set to the called station.
c.) The called station is connected to the ATTENDANT CONSOLE [A-3].
d.) The called station is in a THREE-WAY CALLING [T-2] condition.
e.) CALL BACK [C-1], CAMP-ON [A-1] or CALL WAITING - ORIGINATING [C-31] service is
set to the called station.