NEC NEAX2400 ICS, Руководство по программированию

Страница: 193 / 1089

NEAX2400 IPX Feature Programming Manual
Page 150
NDA-24297, Issue 1
C-7D Call Pickup - Group - D
term
C-7D Call Pickup - Group - D
term
General Description
This feature permits a user to answer any call directed to another line in his preset CALL PICKUP - GROUP by
using a programmable line/feature key.
CALL PICKUP - GROUP - D
term
may be used by seizing dial tone from any multi-line appearance on the D
term
.
A user can be assigned to an additional CALL PICKUP GROUP, referred to as EXPANDED CALL PICKUP
GROUP.
Operating Procedure
To answer an incoming call
1. A station within the CALL PICKUP GROUP rings.
2. Lift the handset; receive dial tone.
3. Press the CALL PICKUP - GROUP feature key; the call is connected to the station. The LCD displays:
Note: When the telephone number of the called/calling station exceeds 8 digits, the last 8 digits are displayed.
However, a maximum of 16-digit calling telephone number can be displayed on the middle line of the LCD,
depending on the system data.
To answer an incoming call CALL HOLD [C-6]
1. A station within the CALL PICKUP GROUP rings.
2. Press the TRANSFER/HOLD feature key; receive special dial tone.
3. Press the CALL PICKUP GROUP feature key; the call is connected to the station.
4. The first party is put on CALL HOLD [C-6] status.
To pick up an incoming call within the EXPANDED CALL PICKUP GROUP
1. A station within the EXPANDED CALL PICKUP GROUP rings.
2. Lift the handset; receive dial tone.
3. Dial the access code or press the feature key for EXPANDED CALL PICKUP; the call is connected to the
station.
Service Conditions
1. A station assigned a fully restricted CLASS OF SERVICE-INDIVIDUAL [C-15] will be unable to answer
incoming Central Office calls using this feature.
2. A CALL PICKUP GROUP - D
term
is defined as those stations having the ability to pick up other station’s
calls using the CALL PICKUP feature.
3. A maximum of 100 stations can be assigned to each group. There is no limit to the amount of groups per
system.
4. If CALL PICKUP GROUP - D
term
is activated while two or more stations within the group are ringing,
the system will connect the calls in the order of priority assigned to the call pick up chain.
5. CALL PICKUP GROUP - D
term
cannot be used to answer OUTGOING TRUNK QUEUING [O-2],
Recall or CALLBACK [C-1] from another station.
PICKUP XXXX XXXX
(Time Display)
Called Station Calling Station Trunk