NEC NEAX2400 ICS, Руководство по программированию

Страница: 691 / 1089

NEAX2400 IPX Feature Programming Manual
Page 648
NDA-24297, Issue 1
S-4D Splitting - D
term
S-4D Splitting - D
term
General Description
This feature allows a D
term
user to alternately converse between two separate parties while one party is connected
and one party remains on hold. The user uses the TRANSFER button to alternate conversations between the two
parties.
Operating Procedure
While a conversation is in progress
1. Press the TRANSFER key; hear special dial tone.
2. Dial the new number; the first party is held, the second party answers.
3. Press the TRANSFER key; return to the first party; the second party is held.
4. Repeat as often as needed.
Service Conditions
THREE-WAY CALLING [T-2D] may be established at any time by pressing the CONF key.
Interactions
1. SPLITTING is inherent to the system and is operated by using the TRANSFER key.
2. The conference trunk is only required when a three-way connection is desired.
Programming
STEP 1: ASYD
- System Data-2, Index 1, bits 0 & 1. Consultation Hold allowed or denied. 00: Denied; 01:
Originating and Terminating Calls allowed, Tandem Call Denied; 11: All calls allowed. Assign data
“11”.
System Data 2, Index 6, bit 2. Leave as data “0” to enable the CALL TRANSFER-ALL CALLS [C-
11] feature.
STEP 2: ATRK
- Assign these LENs as Route 909, Digital Conference Trunk. A LEN consists of the following:
Group and Level numbers for the Digital Conference Trunk are 210, 213, 216, 221, 224, 227, 232, and
235.
STEP 3: MBTK - Make idle the Digital Conference Trunk.
XX X XX X
Group
Unit Group
Level Module