NEC NEAX2400 ICS, Руководство по программированию

Страница: 464 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 421
Internal Zone Paging I-21
Programming (cont’d)
STEP 5: AIZP - Assign INTERNAL ZONE PAGING group data.
TN: Tenant number of calling party
IZPG: INTERNAL ZONE PAGING group number
IZPTN: Tenant number of IZPSTN
IZPSTN: Station number assigned to the INTERNAL ZONE PAGING group
STEP 6: AKYD
- For D
term
sets, INTERNAL ZONE PAGING can be activated using a programmable line/
feature key. Assign KYI=1, FKY=28 (Answer) for answering INTERNAL ZONE PAGING and
KYI=1, FKY=85 (INTERNAL ZONE PAGING) for calling INTERNAL ZONE PAGING group.
STEP 7: ASFC - Assign a Service Feature Class that allows SFI = 134 to the stations that originate
INTERNAL ZONE PAGING.
Assign a Service Feature Class that allows SFI = 145 to the stations that answer to INTERNAL ZONE
PAGING.
FCCS Programming
The following command assignments are required when your system is configured as an FCCS
network.
STEP 1: ASYDL/ASYDN - System Data 1, Index 804, bit 3 (Designation of the maximum digit number of
INTERNAL ZONE PAGING group number) 0/1=2/3 digits.
STEP 2: ASYD - System Data 1, Index 31 (Mounting capacity of Common Memory) must be assigned as data
“04”. System Data 1, Index 380, bit 4 0/1= Answer the INTERNAL ZONE PAGING call by Prime
Line Key after off-hook/by going off-hook.
STEP 3: ANPD/ANPDL/ANPDN
- Reserve a number level for feature access. Assign for Normal (N) and
Hooking (H) services. Assign NND according to the predetermined numbering plan.
STEP 4: ASPA/ASPAL/ASPAN
- Assign the access code for INTERNAL ZONE PAGING, SRV=SSCA
(Service Code Appendix), SIDA=98. Connection Status Indexes for Normal (N), and Hooking (H)
services.
STEP 5: AIZPN - Assign INTERNAL ZONE PAGING group data.
TN: Tenant number of calling party
NIZPG: Network INTERNAL ZONE PAGING group number (1~255)
IZPTN: Tenant number of IZPSTN
IZPSTN: Station number assigned to the INTERNAL ZONE PAGING group
UGN: 1 (Fixed)
STEP 6: AKYD
- For D
term
sets, INTERNAL ZONE PAGING can be activated using a programmable line/
feature key. Assign KYI (Service condition)=1 (Function key) and FKY (Feature key code)=85
(INTERNAL ZONE PAGING). Assign KYI (Service condition)=1 (Function key) and FKY (Feature
key code)=28 (ANSWER) for answering INTERNAL ZONE PAGING.
STEP 7: ASFC
- Assign a Service Feature Class that allows SFI=145 to the stations that answer to INTERNAL
ZONE PAGING.