NEC NEAX2400 ICS, Руководство по программированию

Страница: 833 / 1089

NEAX2400 IPX Feature Programming Manual
Page 790
NDA-24297, Issue 1
V-2 Voice Call
V-2 Voice Call
General Description
This feature enables a single line telephone to make a VOICE CALL [V-2] when the called party is a D
term
set. This
path exists from the calling party to the called party's built-in speaker. If the called party's MIC is on, the called party
can converse hands-free.
Operating Procedure
From a single line station to a D
term
1. Dial the telephone number of the desired D
term
station and receive ringback tone.
2. Perform a switch hook flash.
3. Dial the VOICE CALL access code. A signal tone (two bursts) is transmitted over the called party's
speaker.
4. Called D
term
displays:
5. Announce the call over the built-in speaker.
Service Conditions
1. When the called station is not a D
term
, reorder tone will be sent to the calling party for a pre-determined
time, followed by ringback tone.
2. Once a VOICE CALL has been activated, the called station will appear busy on multi-line sets displaying
the called station.
3. VOICE CALL will follow CALL FORWARDING - ALL CALLS [C-5] and CALL FORWARDING -
BUSY/DON'T ANSWER [C-2, 3].
4. VOICE CALL will terminate at the station whose my line is the same as the extension called.
5. Only the called station can respond HANDS-FREE [H-5D].
6. STATION MESSAGE DETAIL RECORDING SYSTEM [S-10] is not available for this service.
Programming
For a Single-Line Set
STEP 1: ASYD
- System Data 1, Index 17, Bit 0. Hooking (H) service for single-line set. This is used for the
MESSAGE REMINDER [M-19] and VOICE CALL features of a single-line set.
STEP 2: ANPD
- Reserve a number level for feature access. Assign Connection Indexes, CI = N, H, B; Normal
(N), Hooking (H), and Busy (B) (applicable to any feature assigned to this level). Assign NND in
accordance with a predetermined numbering plan.
STEP 3: ASPA - Assign an access code to VOICE CALL, SRV = SSCA, SIDA = 41.
Connection Status CI = H, Hooking (H).
STEP 4: ASFC
- Assign a Service Feature Class that allows SFI = 52 to single-line stations which will be
allowed to initiate Voice Calls.
Assign a Service Feature Class allowing SFI = 93 to D
term
stations that do not allow access by VOICE
CALL.
VOICE
(Time Display)
XXXX