NEC NEAX2400 ICS, Руководство по программированию

Страница: 262 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 219
Called Number Display - Attendant C-59
C-59 Called Number Display - Attendant
General Description
If a call is transferred to the ATTENDANT CONSOLE [A-3] as a result of:
DO NOT DISTURB [D-11]
CALL FORWARDING - ALL CALLS [C-5]
CALL FORWARDING - BUSY LINE [C-2]
CALL FORWARDING - DON'T ANSWER [C-3]
CALL FORWARDING - INTERCEPT/ ANNOUNCEMENT [C-25]
Information pertaining to the called station is displayed on the Attendant Console.
Operating Procedure
1. The Attendant answers an incoming call.
a.) The DEST lamp lights.
b.) The Called telephone number is displayed.
2. The Attendant presses the SRC button.
a.) The DEST lamp goes off, and the SRC lamp lights.
b.) Either the calling party's tenant number is displayed, or RSC number and telephone number are
displayed.
Service Conditions
1. This service is effective when a station-to-station call or a DID call has been routed to an Attendant
Console as a result of:
DO NOT DISTURB [D-11]
CALL FORWARDING - ALL CALLS [C-5]
CALL FORWARDING - BUSY LINE [C-2]
CALL FORWARDING - DON'T ANSWER [C-3]
CALL FORWARDING - INTERCEPT/ANNOUNCEMENT [C-25] and is answered by the
Attendant.
2. If the Attendant presses the SRC button while the called telephone number is displayed, the display
changes to the number of the calling party. The called telephone number cannot be displayed again.
3. While the called telephone number is displayed, the Attendant can transfer the call to a desired station by
keying the destination number on the keypad. In this case, the called telephone number of that call cannot
be displayed again.
4. While the called telephone number is displayed, the Attendant can place the call on hold by pressing the
HOLD key. The called telephone number is displayed again when the Attendant picks up the call again.
5. While the called telephone number is displayed, the Attendant can set CALL PARK [C-29] service. The
called telephone number cannot be displayed again.
Programming
ASYD
- System Data 1, Index 70, Bit 0. Called Number Display when Call Forwarding to ATTCON
0/1: Out/In Service.