NEC NEAX2400 ICS, Руководство по программированию

Страница: 526 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 483
Message Reminder - D
term
M-19D
M-19D Message Reminder - D
term
General Description
This feature allows a D
term
to leave a MESSAGE REMINDER at another D
term
.
Operating Procedure
To send a message from a D
term
1. Dial the desired D
term
station, receive ringback tone or busy tone.
2. Press the MSG key; the LCD displays:
Service set tone is heard.
3. At the called D
term
, the MSG LED will light to indicate a message has been set.
To review the messages
1. Press the MSG key; the LCD displays:
Note: When the station number exceeds 12 digits, MSG is not displayed.
To return the message
1. Lift the handset or press the SPEAKER key while message is displayed.
2. Press the MSG key; the calling station is automatically redialed.
Service Conditions
1. This feature is only available between two D
term
sets, both of which have the MSG key. If a message is
directed to a D
term
that does not have the MESSAGE REMINDER feature, the calling station's LCD
displays:
2. Messages can only be sent if the called station is in the idle or busy condition.
3. Messages cannot be sent while engaged in calling and recalling from CALL TRANSFER - ALL CALLS
[C-11] and from CONSULTATION HOLD - ALL CALLS [C-17].
4. A maximum of four messages may be received at any one D
term
. If a fifth message is attempted, the LCD
will display:
MESSAGE SET
Called Station
XXXX
(Time Display)
Calling Station hr. min. AM/PM
MSG XXXXXXXXXXXX XX: XX AM
(Time Display)
MESSAGE REST
(Time Display)
MESSAGE BUSY
(Time Display)