NEC NEAX2400 ICS, Руководство по программированию

Страница: 759 / 1089

NEAX2400 IPX Feature Programming Manual
Page 716
NDA-24297, Issue 1
S-99 Split Call Forwarding
Operating Procedure (cont’d)
To set SPLIT CALL FORWARDING using D
term
feature key
To set Call Forwarding from an individual station (D
term
)
1. Setting Call Forwarding for an incoming call from a station:
a.) Confirm that the PAGE* (One-touch changeover) lamp is on; if the lamp is off, turn the lamp on
by pressing the PAGE key.
b.) Lift the handset or press the SPEAKER key; receive dial tone.
c.) Press the FORWARD, FORWARD-BY, or FORWARD-DA key; receive special dial tone.
d.) Dial the number of the desired target station; receive service set tone. The following is displayed
on the LCD, when the destination is a station:
When the destination is an ATTENDANT CONSOLE, the D
term
displays:
When the destination is an outside trunk, The D
term
displays:
The FORWARD, FORWARD-BY, or FORWARD-DA lamp turns on.
e.) Replace the handset or press the SPEAKER key. *PAGE feature key is a paging button for
SPEED DIALING - One-Touch - D
term
[S-26D], (FKY = 55).
2. To set Call Forwarding for an incoming call from an outside party:
a.) Confirm that the PAGE (One-Touch Changeover) lamp is off; if the lamp is on, turn the lamp off
by pressing the PAGE key.
b.) Lift the handset or press the SPEAKER key; receive dial tone.
c.) Press the FORWARD, FORWARD-BY, or FORWARD-DA key; receive special dial tone.
d.) Dial the number of the desired target station; receive service set tone. The following is displayed
on the LCD when the destination is a station:
When the destination is an Attendant Console, the LCD displays:
FORWARD SET
XXXXX
(Time Display)
FWD SET OPR
(Time Display)
FORWARD SET
(Time Display)
FORWARD SET XXXXX
(Time Display)
FWD SET OPR
(Time Display)