NEC NEAX2400 ICS, Руководство по программированию

Страница: 429 / 1089

NEAX2400 IPX Feature Programming Manual
Page 386
NDA-24297, Issue 1
I-1 Immediate Ringing
I-1 Immediate Ringing
General Description
This feature causes called stations to ring immediately upon establishment of connections.
Operating Procedure
No manual operation is required.
Service Conditions
1. Ringing is applied to a called station as soon as the switch has determined that the station is idle. There is
no delay caused by waiting for a ring cycle.
2. This feature applies to STATION-TO-STATION [S-11], Attendant (originated or completed), Direct
Inward Dialing (DID), and tie line calls.
3. An idle station rings immediately after the last digit of the called station is dialed.
Programming
ASYD - System Data 1, Index 27, Bit 7. Assign data “1”.