NEC NEAX2400 ICS, Руководство по программированию

Страница: 808 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 765
Tenant Service T-12
Interactions (cont’d)
6. CLASS OF SERVICE-INDIVIDUAL [C-15]: Refer to the programming section. This feature affects the
construction of all classes of service.
Programming
STEP 1: ASYD - System Data 1, Index 8. Assign the number of tenants that the system will serve, in
hexadecimal format.
System Data 1, Indexes 92, 93, & 94. The Bits of these indexes allow for either common or separate
tenant assignments for other specific commands. The following Bits represent the following
commands. Assign as follows; 0/1: Separate/Common.
Index 92
Bit 0, All of ASYD, System Data 2
Bit 1, ASPA
Bit 2, ANPD
Bit 3, ALDN, ASDT & ASAT (Must be assigned as data “1”.)
Bit 4, ARSC
Bit 5, ACFR
Index 93
Bit 0, ASFC
Bit 1, ACFO
Bit 2, ATAS
Bit 3, ASPD
Bit 4, ASTP & AFRS (O.G.Connection)
Bit 5, ASTP & AFRS (I.C.Connection)
Bit 6, AMND
Bit 7, AAED
Index 94
Bit 0, ATNR
Bit 2, APCR. (EPN Only)
STEP 2: ATNR
- Assign the appropriate tenant restrictions.
DAY/NIGHT: Day/Night Mode
D: Day Mode
N: Night Mode
OGTN: Originating Tenant
TMTN: Terminating Tenant
TRI: Tenant Restriction Index (0-15)
RES: Restriction Data (0/1)
0: Restricted
1: Allowed
Assignment of Tenant Restriction Class
TRI:
Tenant Restriction Index
0:
Allows intra and inter-tenant station calls. Allow calls within tenant.
1: Allows CALL FORWARDING-ALL CALLS, DON’T ANSWER, BUSY
LINE on an intra and inter-tenant basis. Allow this feature within tenant.