NEC NEAX2400 ICS, Руководство по программированию

Страница: 179 / 1089

NEAX2400 IPX Feature Programming Manual
Page 136
NDA-24297, Issue 1
C-5D Call Forwarding - All Calls - D
term
Service Conditions (cont’d)
15. A call can be forwarded to an Attendant Console in the remote node via FCCS link.
16. When a call is forwarded through FCCS link, the numbering plans of the originally called station and the
forwarded Attendant Console must be the same.
Interactions
1. Users are unaccustomed to hearing ringback tone when responding to their own station’s ring. Inform
users when providing ringback tone with CALL FORWARDING-ALL CALLS in System Data 1, Index
69, Bit 1.
2. Call Forwarding can only be activated from an idle station.
3. When CALL WAITING [C-12, 31], ATTENDANT CAMP-ON [A-1], and CALL BACK [C-1] are
directed toward Station A, with CALL FORWARDING set to Station B, Station B will receive Call
Waiting Tone.
4. When a station in a STATION HUNTING [S-7, 8, 9] Group initiates CALL FORWARDING-ALL
CALLS, calls normally destined for this station will not be received. The Hunt Group operates as if the
station were busy.
5. A non-controlling UCD station is allowed to activate CALL FORWARDING [C-5]. With this station call
forwarded, only calls that are directly dialed to this station are call forwarded. The member station is
removed from the UCD group under the conditions of this call forwarding feature.
6. If an Attendant attempts BUSY VERIFICATION [B-3] to Station A, which has CALL FORWARDING-
ALL CALLS set to Station B, BUSY VERIFICATION [B-3] proceeds as if the Attendant had attempted
to Verify Station B. If Station A has set CALL FORWARDING-ALL CALLS to the Attendant Console,
BUSY VERIFICATION [B-3] is allowed at Station A if Station A is busy.
7. When CALL FORWARDING-ALL CALLS is in effect, the call forwarded station may be used to
originate calls. See System Data 2, Index 6 Bit 4.
8. When a station is call forwarded, the destination station is recorded for STATION MESSAGE DETAIL
RECORDING [S-10].
9. CALL FORWARDING-ALL CALLS can be overridden, allowing Station B to initiate or transfer calls
back to Station A.
10. STATION-TO-STATION CALLING [S-11] must first be provided.
Programming
STEP 1: ASYD - System Data 1, Index 4, Bit 6. One burst of ringing at the forwarding station when CALL
FORWARDING-ALL CALLS-D
term
is in service? 01: No/Yes.
TK
Node
A
Node
B
FCCS Link
Station A has been set
Call Forwarding service to
Attendant Console B
Attendant
Console B