NEC NEAX2400 ICS, Руководство по программированию

Страница: 371 / 1089

NEAX2400 IPX Feature Programming Manual
Page 328
NDA-24297, Issue 1
D-153 Distinctive Ringing - Caller ID
Service Conditions (cont’d)
13. Ringer patterns 2, 3 or 4 cannot be assigned for this feature. When one of those ringer patterns is assigned
from the MAT, default value “Ringer pattern 6” is automatically set.
14. When System Data 3 is changed, circuit card (LC,ELC) initialization is required.
15. The following circuit card is required for Analog Caller ID:
16. When the multiple incoming calls are simultaneously terminated to the multi-line on the D
term
, the priority
of ringing pattern is as follows:
Programming
STEP 1: ASYD
- System Data 1, Index 417, Bit 0. Recall Ringer Pattern for CALL BACK [C-1], CALL
WAITING - ORIGINATING [C-31], and OUTGOING TRUNK QUEUING [O-2].
0/1 = Ringer pattern 5/Ringer pattern 1.
System Data 3, Index 0. Assign Timer Value for Ringer Pattern 0.
System Data 3, Index 1: Assign Timer Value for Ringer Pattern 1.
System Data 3, Index 3, Bit 0. 2 Burst on the ON Time for Ringer Pattern 0. 0/1 = Not required/
Required.
System Data 3, Index 3, Bit 1. 2 Burst on the ON Time for Ringer Pattern 1. 0/1 = Not required/
Required.
System Data 3, Index 3, Bit 5. 3 Burst on the ON Time for Ringer Pattern 5. 0/1 = Not required/
Required.
System Data 3, Index 7: Assign Timer Value for Ringer Pattern 5.
System Data 3, Index 8: Assign Timer Value for Ringer Pattern 6.
System Data 3, Index 9: Assign Timer Value for Ringer Pattern 7.
STEP 2: ACID
- Assign the calling number for this service.
TYPE: 1
TN: Tenant number
STN: Station number
CID: Calling number (Maximum 28 digits)
SRV: 6 (Distinctive Ringing - Caller ID)
RGP: Ringer pattern (0, 1, 5 - 7)
FCCS Programming
No unique programming is required for the FCCS network.
CIRCUIT CARD NAME REMARKS
PA-8COTBJ
PRIORITY 1ST 2ND 3RD 4TH 5TH
Ringing pattern RG7 RG6 RG5 RG0 RG1